Change Oil & Filter, Lubricate Chassis, Check & Fill Fluids.
Replace Air & Cabin Air Filters.
BRAKE SYSTEM FLUID FLUSH (COMPLETE) – FLUSH AND BLEED – All Wheels – [Includes: Check hydraulic system and mechanical components.]
Remove wheels from vehicle. Inspect brakes. Computer spin balance. Reinstall wheels to vehicle and torque lug nuts to manufacturer's specifications.
REPLACE THE RIGHT FRONT WHEEL STUD AND LUG NUT.
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber angles and adjust as required. Check and set toe-in as required. Center steering wheel.
COOLING SYSTEM – Flush
SPARK PLUGS – Remove & Replace
Joy J. gave our service a 5 star review on 6/13/2024
Change Oil & Filter, Lubricate Chassis, Check & Fill Fluids.
CONTROL ARM – Remove & Replace – Lower,Both – [DOES NOT include alignment.]
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber angles and adjust as required. Check and set toe-in as required. Center steering wheel.
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – Both – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
SERPENTINE BELT & TENSIONER – Remove & Replace – V6
Alvin G. gave our service a 5 star review on 5/17/2024
LEFT FRONT LOWER CONTROL ARM & RIGHT FRONT LOWER CONTROL ARM BUSHINGS AND BALL JOINT – Remove & Replace – Lower,Both – [DOES NOT include alignment.]
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber angles and adjust as required. Check and set toe-in as required. Center steering wheel.
SHOCK ABSORBER – Remove & Replace – Each Side
Remove wheels from vehicle. Inspect brakes. Computer spin balance. Reinstall wheels to vehicle and torque lug nuts to manufacturer's specifications.
Dennis B. gave our service a 5 star review on 5/16/2024
SMOKE TEST THE EVAP SYSTEM AND CHECK FOR LEAKS – NO LEAKS FOUND. CHECK THE INTEGRITY OF THE FUEL CAP – GOOD. USING A VACUUM PUMP APPLY VACUUM TO THE PURGE AND VENT VALVES & CHECK FOR DROPS IN PRESSURE – FOUND THE TWO WAY BYPASS VALVE NOT HOLDING A GOOD VACUUM.
CANISTER VENT SOLENOID – Remove & Replace
Harris N. gave our service a 5 star review on 2/29/2024